Notes
Power Supply Measurements
AC voltage setting:
DC voltage (V): (should be about 24.5 V under load, adjust otherwise)
Ammeter reading (A):
UPS power load w/ 2dBm input(W):
Signal Measurements
- RF power meter: Mini Circuits PWR-SEN-6G+ USB power sensor
- internal attenuator set at 0 dBm
- power meter 50 dBm offset applied for measurements at rear panel connectors
- 10 dB attenuators used at FWD and RFL outputs to achieve 50 dB atten of actual signal
| Location | Meter Reading (dBm) | Rabbit Reading (dBm) | Comments | |
|---|
| IN connector | | | |
| FWD connector | | | |
| RFL connector | | | |
| OUT connector | | | |
Temperature Measurements
- temperature meter: DM6802B Digital Thermometer
| Location | Meter Reading (deg C) | Rabbit Reading (deg C) | Comments | |
|---|
| BTC | | | |
| MCI | | | |
| AMB | | | |
Spectrum Analyzer Images
Input Signal
At FWD connector
At RFL connector
At OUT connector
