Altium Designer Pick and Place Locations U:\OCEANPHYSICS\rad-CELF - A\INTERFACE\Project Outputs for F9T-2-RADCELF-A\Pick Place\Pick Place for F9T-2-RADCELF-A.txt ======================================================================================================================== File Design Information: Date: 06/04/21 Time: 16:13 Revision: Not in VersionControl Variant: No variations Units used: mm Designator Comment Layer Footprint Center-X(mm) Center-Y(mm) Rotation Description P1 AF1D-200-08-G-H63 TopLayer AF1D-200-08-G-H63 6.107 11.276 90 Connector FIX2 8882 TopLayer 8882 64.323 2.896 0 Connector FIX3 8882 TopLayer 8882 3.823 28.896 0 Connector FIX4 8882 TopLayer 8882 64.323 28.896 0 Connector R1 4.7K TopLayer 0603 19.662 14.966 90 RES SMD 4.7K 1% 1/5W 0603 FIX1 8882 TopLayer 8882 3.823 2.896 0 Connector P16 F1D-02-G BottomLayer F1D-02-G 57.995 13.667 360 Connector P17 BottomLayer F1D-02-G 51.445 13.667 360 Connector P18 A61-12-7-G BottomLayer A61-12-7-G 16.324 30.868 270 Connector P3V3 AF1C-02-G-H5 TopLayer AF1C-02-G-H5 52.159 7.784 180 Connector P+5V AF1C-02-G-H5 TopLayer AF1C-02-G-H5 46.005 7.796 180 Connector R2 4.7K TopLayer 0603 13.381 15.711 360 RES SMD 4.7K 1% 1/5W 0603 R3 4.7K TopLayer 0603 22.895 14.966 90 RES SMD 4.7K 1% 1/5W 0603